Skutch-electronics BA-1000-A V4.00 Technical Reference Manual Bedienungsanleitung PDF herunterladen (Seite 12)

Version 4.00 Page 12

The system will respond by saying: "Menu,

enter number". At this point you have 6 MENU

choices.

! Menu Choices

=Enter a Notification Number

In this mode you can verify, change, disable,

enable or erase any, or all, of the 16 alert notification

numbers in the system.

The unit first states the entry number (1-16),

followed by the TYPE (Pager or Voice), then it tells

you the current number, followed by instructions, as

follows:

"Entry 1, Voice, 7866186, 0 to Disable, 1 to

Change, 3 to skip, 7 to Backup."

The system will indicate a blank number by

saying "New".

To ERASE a number, enter 1 1 #

1 1 #1 1 #

1 1 #.

To EXIT back to the Remote Menu, press *

The default PAUSE BEFORE NEXT DIAL is,

immediate (00) after a voice call, and 5 minutes (05)

after a pager call. You can enter a user defined

PAUSE by pressing *

* within 2 seconds after

pressing the #

# on entering a new number. The

entry is in minutes and MUST be 2 digits.

• Example:

5 minutes is entered as: 0 5 #

0 5 #0 5 #

0 5 #.

=Record a New Outgoing

Message

After the tone, start dictating your new

outgoing message. When you are finished press *

to stop. If the unit detects 4 seconds of silence, it

will automatically end the recording. The system

will play the message and return to the Remote

Menu automatically. Pressing *

* during the

message playback will return the system to the

Remote Menu.

=Outging Message Test

The outgoing message will play back then

return to the Remote Menu. Pressing *

* during

playback will return the system to the Remote Menu.

=Start Group/Default Box

This parameter is used ONLY in On

Call/Voice_Box and Cycle Alert Modes.

In On Call mode, if the caller dials an 8

8, then

this parameter selects the group to be notified. This

allows you to keep the same outgoing message, but

allows you to change the person(s) who will be

notified with one easy step.

In Voice Box mode, this parameter shows the

default voice mail box that will be used if the caller

doesn’t select any option at the main message.

In Cycle mode, this parameter controls who is

the FIRST to be called. If the message is not

received, the system will continue dialing in

sequence. In this mode the system will eventually

call all programmed notification numbers until the

message is received.

=Answer Mode Toggle

This parameter lets you switch the system

between Idle Mode and Answer Mode. NOTE:

When the system is in voice box mode or On Call

mode, you will only be allowed to remotely place

the unit into Answer Mode, not to Idle Mode.

Pressing 0

0 toggles between the two modes;

first press “Enables” (changes to Answer Mode),

next press “Disables” (changes to Idle Mode).

=Disconnect

You can force disconnect by pressing *

* from

the Remote Menu. The unit will automatically

disconnect on time out.

Notification

Dialing

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Skutch-electronics BA-1000-A V4.00 Technical Reference Manual Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Skutch-electronics BA-1000-A V4.00 Technical Reference Manual