Skutch-electronics BA-1000-A V4.00 Technical Reference Manual Bedienungsanleitung PDF herunterladen (Seite 6)

Version 4.00 Page 6

" Remote Outgoing Message recording and

playback.

" Remote Notification Number

programming, enabling or disabling.

" Remote START GROUP programming.

" Change between Idle and Answer modes.

Power Fail Friendly

If the power fails, the BA-1000-A will

remember its exact mode. So, when power is

restored, the BA-1000-A will resume where it left

off; whether dialing or waiting for calls to come in.

Other Features

" Programmable Ring Delay from 1 to 12,

or Toll Saver mode.

" Announce ONLY Mode.

" Voice Controlled Recording.

" Maximum Record Time Limit,

adjustable from 10 seconds to 4 minutes,

or unlimited.

" CPC Disconnect (ON/OFF).

" Dial Tone disconnect (ON/OFF)

" Auto Disconnect on Local Pick Up, the

unit automatically disconnects when you

pick up a local phone.

" Disk FULL message. A special message

plays when the BA-1000-A runs out of

message storage space: "System full

please try again later".

" Four digit user programmable remote

programming access code.

" Automatic clock control can be set to let

the unit turn itself on during non-

business hours.

" 128, 32 digit, notification phone numbers

can be user programmed.

Installation

! Location

When selecting a location for the system, the

following conditions MUST be avoided:

Temperatures above 95°F.

Temperatures below 65°F.

Carpeted areas that produce Static Electricity.

High dust/tobacco smoke areas.

Exposure to direct sunlight.

The SYSTEM and the POWER CUBE should

be located in a well ventilated area.

! Power

The SYSTEM can be used on a three-prong

grounded 110VAC power outlet. This is needed for

proper protection of the unit's circuitry. Power

circuits that are used for any heavy equipment such

as large freezers, blowers, heaters, copiers, or any

electrical equipment that contains large motors,

should be avoided. Heavy electrical equipment can

cause power glitches over the power line which

could interfere with the operation of the system. If

your power lines are excessively noisy a power filter

MIGHT solve the problem.

! Phone Connection

The system's telephone line requirements are

the same as a standard telephone. Its connection to

the telephone line is the same as any NORMAL

single line telephone that you could buy at any

department store.

! Business Telephones

This system is not compatible with modular

jacks used for multi-line ELECTRONIC PHONE

SYSTEMS. To connect the SYSTEM to this type of

phone system, an RJ-11 jack must be ordered from

your local telephone company. It should be noted

that when the BA-1000-A is used, the line indicator

lights on the phone system will not show the line as

being used.

! Single Line Phones

If you have a single line phone it is probably

connected to a small modular jack. Simply unplug

the phone and plug the system in. If you wish to

have both the phone and the system connected at the

same time you can plug the phone into the PHONE

jack on the back of the BA-1000-A.

! Order A Phone Jack

If you need to order a jack from the telephone

company, you will need the following information:

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Skutch-electronics BA-1000-A V4.00 Technical Reference Manual Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Skutch-electronics BA-1000-A V4.00 Technical Reference Manual