Skutch-electronics BA-1000-A V4.00 Technical Reference Manual Bedienungsanleitung PDF herunterladen (Seite 13)

Version 4.00 Page 13

If the BA-1000-A detects a call to be Urgent, it

will immediately hang up and start searching for

you. It will start by dialing the first pre-programmed

notification number, and will keep calling numbers

until the Urgent call has been reviewed. The BA-

1000-A will keep calling the list of notification

numbers over and over until either: the urgent

message is retrieved or it has called all of the

numbers 20 times each, whichever comes first.

Once the system contacts you, it says; "I have an

urgent message from your office. Enter the access

code". Once you enter the access code the BA-

1000-A will play you the urgent message.

Setup Mode

Setup Mode is used to set the clock and to

change various system parameters of the BA-1000-

A. It should be noted that changing the system

parameters WILL effect the operation of the

machine. You should not change any parameters

that you do not understand or it might cause a

malfunction in the operation. Call technical

support if you are not sure!

Enter:

888

888888

888

! Set CURRENT Time

The first option in System Setup is to set the

current time. The display will show the following:

Set CURRENT Time

1=Change #=Next

You can press then release 1

1 to change the

current time or #

# to proceed to the next option.

You can press then release ~

~ to exit

setup mode.

Set The Current Day

If you press then release 1

1 to change the

time; the display shows:

Enter day, 1 – 7

#=Sunday

The current day will be shown in the bottom of

the display. To change the day, press then release

the corresponding number followed by #

#; i.e. 1

for Sunday, 2

2 for Monday, etc.

Set The Current Date

Now the display will show:

-- Enter Date –-

# = 01/01/1980

The current date will appear in the bottom of

the display. You can enter a new date followed by

#, or just press then release #

# to keep the

current date.

Set the Current Time

Now the display will show:

-- Enter time --

- # = 12:00 pm –

The current time will appear in the bottom of

the display. You can enter a new time followed by

#, or just press then release #

# to keep the

current time. You can change between a.m./p.m. by

pressing then releasing the *

! Access Code=1234

This is the general access code used to remotely

retrieve messages left on the system, by modes 0, 1

and 3. The display will look as follows:

Access Code=1234

1=Change #=Next

You can press then release 1

1 to change the

access code, followed by the #

#, or press then

release #

# to proceed to the next option. You can

press then release ~

~ to exit setup mode.

! Play Only= Off

This controls Announcement Only mode.

When ON, the unit will answer the phone, play the

outgoing message, and will hang up without

recording a response. The display will look as

follows:

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Skutch-electronics BA-1000-A V4.00 Technical Reference Manual Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Skutch-electronics BA-1000-A V4.00 Technical Reference Manual