Skutch-electronics BA-1000-A V4.00 Technical Reference Manual Bedienungsanleitung PDF herunterladen (Seite 16)

Version 4.00 Page 16

! Set AUTO CLOCK

This option allows you to set the starting and

stopping times, for each day of the week, that the

system uses to enter/exit clock controlled auto

answer mode; the display will look as follows:

Set AUTO CLOCK

1=Change #=Next

You can press then release 1

1 to change the

times or #

# to proceed to the next option. You can

press then release ~

~ to return to Total

Calls. The default times are to start at 5:00 p.m. and

end at 8:00 a.m.

Select The Day To Change

Press then release 1

1 to change the time; the

display shows:

Enter day, 1 – 7

#=Sunday

To change the auto times for a day, press then

release the corresponding number followed #

example, enter 1

1 for Sunday, 2

2 for Monday,

etc.

Set The Start Time

This is the time you want the system to activate

itself (normally this is your quitting time). Now the

display will show:

Answering START

- # = 05:00 pm –

Now you can enter a new start time followed by

#, or just press then release #

# to keep the

current time. You can change between a.m./p.m. by

pressing then releasing the *

Set The Stop Time

This is the time you want the system to return

to Idle Mode (normally this is the time you start

work). Now the display will show:

Answering STOP

- # = 08:00 am –

Now you can enter a new stop time followed by

#, or just press then release #

# to keep the

current time. You can change between a.m./p.m. by

pressing then releasing the *

Now the system will return you to the initial

dialing times screen so you can select another day to

adjust (you will notice that it already shows the next

day in the display). To exit from this mode, press

then release ~

~ to return to Total Calls.

! Remote Code=0506

This is the access code used to remotely

program the unit or record/test your outgoing

message. The display will look as follows:

Remote Code=0506

1=Change #=Next

You can press then release 1

1 to change the

remote code, followed by the #

#, or press then

release #

# to proceed to the next option. To exit

from this mode, press then release ~

~ to

return to Total Calls.

! Factory Reset

This option is provided to restore all of the

setup parameters back to the factory defaults. This

should only be used when operation of the system

has been messed up because the parameters were

changed. The display will show the following:

Factory Reset

1=Reset #=Next

Press then release 1

1 and it will show the

following for 1 seconds:

Loading Defaults

- Please Wait –

The system will then show the following:

Factory Reset

1=Reset #=Next

You can press then release 1

1 to reload the

defaults, or press then release #

# to proceed to the

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Skutch-electronics BA-1000-A V4.00 Technical Reference Manual Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Skutch-electronics BA-1000-A V4.00 Technical Reference Manual